manualshive.com logo in svg

Hyundai Yanmar 3TNV82A-B, Manual

Share
Download
Hyundai Yanmar 3TNV82A-B Manual Download Page 128

28

  ――  7. Main Menu

7.4.5 Active Control Graph

The  graph  is  displayed  only  when  you  select  "It  receives［graph  display］"  of  Reception  Mode  of  Active 
Control.
1）Additional Information view（cursor value）

The data item name selected in graph setting operation and the value at the cursor position are displayed.
<Graph 1>：Cursor value of Graph Top.
① Position：Displays the data number at the cursor point.
② Displayed item and data ： Displays an item name and data. The background color corresponds to the 

graph line color.

2）Operation tool bar

③ 

：Prints a hardcopy of the screen.

④ 

：Saves the screen in BMP format.

⑤ 

：Saves buffered data in a CSV file.

⑥ 

：Lets you specify displayed items and scaling for the top graph.

3）Main view

Displays graph 1. For information on operations related to graphs, see Chapter 8.

Figure 7-12 ［Diagnostic Test］-［Active Control Graph］Screen

③ ④

⑥

①

②

⑤

Summary of Contents for Yanmar 3TNV82A-B



































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands