26
―― 7. Main Menu
7.4.4 Active Control 【Mechanic Function】
The functions in this screen are used to check feedback control(rack position control, speed governing
control, etc)and auto calibration(idle rack position, etc)and measurement. They are categorized into 2
groups:functions available only when the engine is stopped, and functions available only when the clutch is
in neutral and the engine is running. You can select and execute each function by clicking the corresponding
"Current Value" value.
1)Operation tool bar
①
:Prints a hardcopy of the screen.
②
:Saves the screen in BMP format.
③
:Saves data on the screen in a CSV file.
2)Main view
④
Manual
: The checkmark, which appears when active control operation is performed, indicates that
auto control is stopped.
⑤
Description
:Control item name
⑥
Condition
: Indicates whether the engine must be running. "STOP" indicates that the item cannot be
executed while the engine is running. "RUN" indicates that the engine must be running.
⑦
Measured
:Shows a measured value(feedback value).
⑧
Desired
: Shows the current setting value(desired value).Clicking the field opens a sub-window
for you to change the value.
⑨
Unit
:Unit.
Figure 7-10 [Diagnostic Test]-[Active Control]Screen
①
②
④
⑤
⑥
⑦
⑧
⑨
③
Summary of Contents for Yanmar 3TNV82A-B
