![background image](http://html1.mh-extra.com/html/hyundai/yanmar-3tnv82a-b/yanmar-3tnv82a-b_manual_2196324142.webp)
42
―― 7. Main Menu
7.7.2 Digital Channels 【Mechanic Function】
This screen displays the information of the contact input/output signals including the channel assignment and
logic. For outputs, it also displays whether active output is allowed.
1)Operation tool bar
①
:Prints a hardcopy of the screen.
②
:Saves the screen in BMP format.
2)Main view
③
I/O
:Type of contact:input or output.
④
LID
:Data management number called local ID.
⑤
CID(SPN)
:Parameter ID number complying with SAE J1939.
⑥
Description
:Description of the sensor, signal, etc.
⑦
Acronym
:Acronym(complying with the SAE standard)
⑧
Byte
:Byte position of data.
⑨
Bit
:Bit position of data.
⑩
Logic
:Whether logic is reversed or not.
⑪
Mask
:Permission mask for active control(0 indicates that you cannot change the setting).
Figure 7-25 [ECU Identification]-[Analog Channels]Screen
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
Summary of Contents for Yanmar 3TNV82A-B
