Hyundai Yanmar 3TNV82A-B, Manual

Page: 133 / 162

7. Main Menu ――
33
3）Additional Information view
（i）Trigger Setting
Displays trigger setting information.
①
Manual Trigger ：Lets you generate a trigger manually.
②
Trigger
：Displays the trigger setting status.
③
Data
：Displays the acronym of data for which a trigger is set.
④
Level
：Displays the threshold value of the trigger setting.
⑤
Type
：Displays the type of the set trigger（rising edge or falling edge）．
⑥
Delay
：Shows the number of data points between the start of storage and the trigger.
⑦
Storage
： Shows the number of data points to be stored（a single point means a set of data items
at a certain point of time）．
（ii）Preservation status
Displays the data logging status.
⑧
Status
： Displays the status："Display" during waiting for a trigger, "Preservation" during storing
data, or "Completion" at the completion of measurement.
⑨
Counter
：Displays the number of acquired data points.
⑩
Mon. Start
：Displays the time when monitoring starts.
⑪
Run
：Displays the elapsed time from the start of measurement.
⑫
Rest
：Displays the remaining time until the end of measurement.
（iii）Sampling setting
Displays the sampling setting status.
⑬
Mode
： Displays "Intermittence" when the sampling frequency setting is 100 msec or "Polling" for
other settings.
⑭
Interval
：Displays the sampling frequency.
Figure 7-16 ［Data Logging］-［Data Monitor］Screen
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
⑫
⑬
⑭