36
―― 7. Main Menu
7)Sampling Setting sub-window
Clicking the
button on the Operation tool bar enables the sampling frequency setting operation.
①
Select
:Select a sampling frequency by checkmarking one of the buttons.
②
/
: These buttons are available when you select the radio button that lets you enter any value.
You can increase/decrease the sampling frequency in steps of 1, 10, or 100.
③
Unit
:Select a unit.
④
Set
:Sets the entered information.
⑤
CANCEL
:Cancels the entered information..
Figure 7-19 [Data Logging]-[Data Monitor]-[Sampling Setting]Sub-Window Screen
② ④ ③
⑤
①
8)Overview of data sampling operation
① Set item names you want to display.…… 4)、5)
② Set the trigger conditions as necessary.(If you do not set them, you can forcibly start recording by
clicking the Manual Trigger button.)……6)
③
Click.……1)③
④ When a trigger is generated(or the Manual Trigger button is clicked),Preservation is displayed in the
Status field of "Preservation status."……4)⑧
⑤ When you click
to stop receiving data manually or the buffer becomes full, Completion is displayed in
the Status field of "Preservation status" and the reception stops.
⑥ As necessary, you can check the graph or save data in a file.
Summary of Contents for Yanmar 3TNV82A-B
