![background image](http://html1.mh-extra.com/html/hyundai/yanmar-3tnv82a-b/yanmar-3tnv82a-b_manual_2196324155.webp)
8. Graph Function ――
55
8.1.3 Digital Mode
This mode is used to display the ON/OFF information of digital inputs/outputs and control flags. You need to
know the parameters and bit numbers corresponding to the necessary information in advance. Data items you
can select are DIS1, DIS2, DOS1, and DOS2. For information on detailed data, see ECU_ID(Chapter 7.7.2).
① Selecting digital mode:Click
Digital
of Display Mode to checkmark it.
② Selecting data 1: Click the Data Select No. 1 combo box, and select the data you want to graph using
the scrollbar.
③ Selecting the bit to be displayed: Click the combo box of Data Select No. 1 in the lower middle part,
and select the bit of the data you want to graph using the scrollbar.
④ Setting data 2 to data 4: As necessary, repeat Steps ② to ④ to set data 2 to data 4.
⑤ Reflecting the settings: Click the
Set
button. The settings are reflected and the graphs are displayed.
You can save and open a file in the same way as in analog mode.
Figure 8-3 [Graph Set]-[Digital Mode]Screen
①
③
②
⑤
Summary of Contents for Yanmar 3TNV82A-B
