CONTROL SYSTEM
TNV Application Manual
2-17
Output Contact
Rack actuator
RACKSOL
E42
Circuit: High side, PWM port
Output: 6.0 A Max. (@12 V)
Main relay
MAIN-RLY
E34
Circuit: High side
Output: 200 mA Max. (@12 V)
Rack actuator relay
RACK-RLY
E33
Circuit: High side
Output: 200 mA Max. (@12 V)
Air heater relay
AIRHT-RLY
E44
Circuit: Low side
Output: 12 A Max. (@12 V)
CSD solenoid coil
CSD-CL
E41
Circuit: Low side, PWM port
Output: 2.41 A Max. (@12 V)
Failure lamp
FAIL-LMP
E12
Circuit: High side
Output: 300 mA Max. (@12 V)
Lamp load: 12 V/3.4 W Max.
Rush current: 12V/3 A-10ms Max.
Preheat lamp
PREHT-LMP
E23
Circuit: High side
Output: 300 mA Max. (@12 V)
Lamp load: 12 V/3.4 W Max.
Rush current: 12V/3 A-10ms Max.
Application output 1
APP-OP1
E20
Circuit: High side, PWM port
Output: 300 mA Max. (@12 V)
Lamp load: 12 V/3.4 W Max.
Rush current: 12V/3 A-10ms Max.
Relay load: 40
Ω
Min., 200 mH Max.
Application output 2
APP-OP2
E2
Circuit: High side, PWM port
Output: 300 mA Max. (@12 V)
Lamp load: 12 V/3.4 W Max.
Rush current: 12V/3 A-10ms Max.
Relay load: 40
Ω
Min., 200 mH Max.
Pulse
Speed monitor
NRPM-M
E22
Circuit: High side, direct-coupled to speed input
Output: 200 mA Max. (@12 V)
ON voltage: 1.5 V Max.
OFF voltage: Load power supply voltage
Output withstand voltage: 200 V
Load factor monitor
LOAD-M
E32
Circuit: High side, PWM port
Output: 200 mA (@12 V)
ON voltage: 1.5 V Max.
OFF voltage: Load power supply voltage
Output withstand voltage: 200 V
Step motor phase A
STPM-A
E31
Circuit: High side
Output: 1.0 A Max. (@12 V)
Step motor phase B
STPM-B
E21
Circuit: High side
Output: 1.0 A Max. (@12 V)
Step motor phase C
STPM-C
E11
Circuit: High side
Output: 1.0 A Max. (@12 V)
Step motor phase D
STPM-D
E1
Circuit: High side
Output: 1.0 A Max. (@12 V)
Com-
municat
ion
Network
CANL
CANL
E39
ISO 11898 (Ver2.0B), 250/500 kbps
CANH
CANH
E40
CAN terminator
RECAN
E30
CAN terminator resistance: 120
Ω
when E30 is coupled to CANL (E39)
Serial
RxD1
RxD
E3
TTL level
(Dedicated for Yanmar use)
TxD1
TxD
E4
Table 2-3 E-ECU I/O description
I/O
Type
Pin function/name
Symbol
No.
Description
00_Electronic_Control_System.book 17 ページ 2006年5月29日 月曜日 午後2時12分
Summary of Contents for Yanmar 3TNV82A-B
