manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 522

7-62

Maintenance

In an emergency, if you do not have
a spare fuse, use a fuse of the same
rating from a circuit you may not
need for operating the vehicle, such
as the cigarette lighter fuse.
If the headlamps or other electrical
components do not work and the
fuses are OK, check the fuse panel
in the engine compartment. If a fuse
is blown, it must be replaced with the
same rating.

Fuse switch

Always, place the fuse switch to the
ON position.
If you move the switch to the OFF
position, some items such as the
audio system and digital clock must
be reset and the smart key may not
work properly.

Information 

If the fuse switch is OFF, the above
message will appear.

i

OAD075023

OAD045144/OTL045155L

■

Conventional cluster 

■

Supervision cluster 

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands