manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 232

3-138

Convenient features of your vehicle

Instrument panel vents

The outlet vents can be opened (

)

or closed (

) separately using the

thumbwheel.
Also, you can adjust the direction of
air delivered from these vents using
the vent control lever as shown.

Temperature control

Turn the knob to the right to increase
the fan speed temperature and air-
flow. Turn the knob to the left to
decrease fan temperature.
The temperature will increase or
decrease by 1°F/0.5°C for each but-
ton press. When set to the lowest
temperature setting, the air condi-
tioning will operate continuously.

Adjusting the driver and passenger
side temperature equally

• Press the "SYNC" button to oper-

ate the driver and passenger side
temperature equally.
The passenger side temperature
will be set to the same temperature
as the driver side temperature.

• Turn the left temperature control

knob. The driver and passenger
side temperature will be adjusted
equally.

OAD045317

OAD045304

OAD045318

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands