manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 144

3-50

Convenient features of your vehicle

5. Within 3 seconds, push and hold

the control lever forward until the
sunroof operates as follows:

Tilt down 

→

Slide Open 

→

Slide

Close.

Do not release the lever until the
operation is completed.
If you release the lever during opera-
tion, start the procedure again from
step 2.

6. Release the sunroof control lever

after all steps have completed. (The
sunroof system has been reset.)

Information 

• If the sunroof is not reset when the

vehicle battery is disconnected or
discharged, or the sunroof fuse is
blown, the sunroof may not operate
normally.

• For more detailed information, we

recommend that you contact an
authorized HYUNDAI dealer.

i

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands