manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 405

5-85

Dri
ving y

our v

ehicle

5

Warning message

Check SCC radar

When the sensor lens cover is
blocked with dirt, snow, or debris, the
Smart Cruise Control System opera-
tion may stop temporarily. If this
occurs, a warning message will
appear on the LCD display. Remove
any dirt, snow, or debris and clean
the radar sensor lens cover before
operating the Smart Cruise Control
System.

The Smart Cruise Control system
may not properly activate, if the radar
is totally contaminated, or if any sub-
stance is not detected after turning
ON the engine (e.g. in an open ter-
rain).

Check SCC system

The message will appear when the
vehicle to vehicle distance control
system is not functioning normally.
Take your vehicle to an authorized
HYUNDAI dealer and have the sys-
tem checked.

OLF054440N

OLF054444N

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands