manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 197

3-103

Con

v

enient f

eatur

es of y

our v

ehicle

Range

Range (1)

• The range is the estimated dis-

tance the vehicle can be driven
with the remaining fuel in the fuel
tank.
- Distance range:

1 ~ 9999 mi. or 1 ~ 9999 km

• If the estimated distance is below 

1 mile (1 km), the trip computer will
display "----" as the range.

Information

• If the vehicle is not on level ground

or the battery power has been inter-
rupted, the range function may not
operate correctly.

• The range may differ from the actu-

al driving distance as it is an esti-
mate of the available driving dis-
tance.

• The trip computer may not register

additional fuel if less than 1 gallon
(3 liters) of fuel are added to the
vehicle.

• The fuel economy and range may

vary significantly based on driving
conditions, driving habits, and con-
dition of the vehicle.

Average Fuel Economy (2)

• The average fuel economy is calcu-

lated by the total driving distance
and fuel consumption since the last
average fuel economy reset.
- Fuel economy range:

0.0 ~ 99.9 MPG or L/100km or
km/L

• The average fuel economy can be

reset both manually and automati-
cally.

Manual reset

To clear the average fuel economy
manually, press the OK button on the
steering wheel for more than 1 sec-
ond when the average fuel economy
is displayed.

For more information on the OK
button, refer to the "LCD Display
Control" in this chapter.

i

3

■

Type A

■

Type B

OTLE045264/OTLE045265

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands