manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 396

5-76

Driving your vehicle

To Adjust the Sensitivity of
Smart Cruise Control 

The sensitivity of vehicle speed
when following the front vehicle to
maintain the set distance can be
adjusted. Go to the User Settings
Mode (Driving Assist) and select
SCC (Smart Cruise Control). You
may select one of the three stages
you prefer.
• Slow:

Vehicle speed following the front
vehicle to maintain the set distance
is slower than normal speed.

• Normal:

Vehicle speed following the front
vehicle to maintain the set distance
is normal.

• Fast:

Vehicle speed following the front
vehicle to maintain the set distance
is faster than normal speed.

(Continued)

•

Do not use the Smart Cruise
Control when it may not be
safe to keep the vehicle at a
constant speed:
- When driving in heavy traffic

or when traffic conditions
make it difficult to drive at a
constant speed

- When driving on rainy, icy, or

snow-covered roads

- 

When driving on hilly or

windy roads

- When driving in windy areas
- When driving in parking lots
- 

When driving near crash

barriers

- When driving on a sharp

curve

- When driving with limited

view (possibly due to bad
weather, such as fog, snow,
rain or sandstorm)

OLF054441N

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands