Hyundai Elantra 2017 Owner'S Manual Download Page 255

Page: 255 / 586

4-3

Multimedia System

• Do not clean the inside of the

rear glass window with a cleaner
or scraper to remove foreign
deposits as this may cause dam-
age to the antenna elements.

• Avoid adding metallic coatings

to the rear glass window. These
can degrade AM and FM broad-
cast signals.

Steering Wheel Audio Control

Do not operate multiple audio
remote control buttons simultane-
ously.

VOLUME (VOL + / - ) (1)

• Press the VOLUME switch up to

increase volume.

• Press the VOLUME switch down to

decrease volume.

SEEK/PRESET (

) (2)

If the SEEK/PRESET switch is
pressed up or down and held for 0.8
second or more, it will function in the
following modes:

RADIO mode

It will function as the AUTO SEEK
select button. It will SEEK until you
release the button.

MEDIA mode

It will function as the FF/RW button.

If the SEEK/PRESET switch is
pressed up or down, it will function
in the following modes:

RADIO mode

It will function as the PRESET STA-
TION UP/DOWN button.

MEDIA mode

It will function as the TRACK UP/
DOWN button.

NOTICE

OAD045446N

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Elantra 2017

Reviews:

Brands by name

Popular brands

Hyundai Elantra 2017, Owner'S Manual

Search results

Summary of Contents for Elantra 2017

Reviews:

Brands by name

Popular brands