manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 43

2-18

Safety system of your vehicle

To reinstall the head restraint:
1. Put the head restraint poles (2) into

the holes while pressing the
release button (1).

2. Adjust the head restraint to the

appropriate height.

3. Recline the seatback (4) forward

using the seatback angle lever/
switch (3).

Rear seat head restraints 

The rear seats are equipped with
head restraints in all the seating
positions for the passenger's safety
and comfort.

Adjusting the height up and down 

To raise the head restraint:
1. Pull it up to the desired position (1).

To lower the head restraint:
1. Push and hold the release button

(2) on the head restraint support.

2. Lower the head restraint to the

desired position (3).

ODH034111

OAD035013

OAD035014

■

Type A

■

Type B

OAD035018

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands