manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 384

5-64

Warning 

• If you cross a lane line, the lane

line you cross will blink (yellow) on
the LCD display.

• If the steering wheel appears, the

system will try to control the vehi-
cle’s steering to prevent the vehicle
from crossing the lane line.

If all the conditions to activate LKAS
is not satisfied, the system will con-
vert to LDWS (Lane Departure
Warning System) and warn the driv-
er only when the driver crosses the
lane lines.

If the driver takes their hands off the
steering wheel for several seconds
while the LKAS is activated, the sys-
tem will warn the driver with a visual
and audible warning.

Driving your vehicle

■

Left lane line

■

Right lane line

OAD055103N/OAD055102N

■

Left lane line

■

Right lane line

OAD055053N/OAD055051N

OAD055105N

The warning message may
appear late according to road
conditions. Therefore, always
have your hands on the steering
wheel while driving.

WARNING  

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands