manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 362

5-42

Driving your vehicle

BSD (Blind Spot Detection) /
LCA (Lane Change Assist)

Operating conditions

To operate:
Press the BSD switch with the igni-
tion switch in the ON position.
The indicator on the BSD switch will
illuminate.

To cancel:
Press the BSD switch again. The
indicator on the switch will go off.

Information 

• If the ignition switch is pressed OFF

and then ON again, the BSD system
returns to the previous state.

• When the system is turned on, the

warning light will illuminate for 3
seconds on the outer side view mir-
ror. 

The system will activate when:
1. The system is on.
2. The vehicle speed is above about

20 mph (30 km/h).

3. An oncoming vehicle is detected

in the blind spot area.

i

OAD055027N

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands