manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 130

3-36

Convenient features of your vehicle

Integrated HomeLink

®

Wireless

Control System

The HomeLink

®

Wireless Control

System can replace up to three hand-
held radio-frequency (RF) transmit-
ters with a single built-in device. This
innovative feature will learn the radio
frequency codes of most current
transmitters to operate devices such
as gate operators, garage door open-
ers, entry door locks, security sys-
tems, even home lighting. Both stan-
dard and rolling code-equipped trans-
mitters can be programmed by fol-
lowing the outlined procedures.
Additional HomeLink

®

information

can be found at: www.homelink.com
or by calling 1-800-355-3515.
Retain the original transmitter of the
RF device you are programming for
use in other vehicles as well as for
future HomeLink

®

programming. It is

also suggested that upon the sale of
the vehicle, the programmed
HomeLink

®

buttons be erased for

security purposes.

Programming HomeLink

®

Please note the following:
• When programming a garage door

opener, it is advised to park the
vehicle outside of the garage.

• It is recommended that a new bat-

tery be placed in the hand-held
transmitter of the device being pro-
grammed to HomeLink

®

for quicker

training and accurate transmission
of the radio-frequency signal.

• Some vehicles may require the

ignition switch to be placed in the
ACC (or "Accessories") position for
programming and/or operation of
HomeLink

®

.

• In the event that there are still pro-

gramming difficulties or questions
after following the programming
steps listed below, contact
HomeLink

®

at: www.homelink.com

or by calling 1-800-355-3515.

Before programming HomeLink

®

to a garage door opener or gate
operator, make sure people and
objects are out of the way of the
device to prevent potential harm
or damage. Do not use the
HomeLink

®

with any garage door

opener that lacks the safety stop
and reverse features required by
U.S. federal safety standards (this
includes any garage door opener
model manufactured before April
1, 1982). A garage door that can-
not detect an object - signaling
the door to stop and reverse -
does not meet current U.S. feder-
al safety standards. Using a
garage door opener without
these features increases the risk
of serious injury or death.

WARNING 

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands