Hyundai Elantra 2017 Owner'S Manual Download Page 275

Page: 275 / 586

4-23

Multimedia System

(7)

[1] ~ [6]

(Preset)

• Radio mode : Saves frequencies

(channels) or receives saved fre-
quencies (channels).

• CD, USB, iPod

, My Music* mode

[RPT]

: Repeat

[RDM]

: Random

In the Radio, Media, Setup, and
Menu pop up screen, the number
menu is selected.
* if equipped

(8)

DISP

• Each short press toggles through

the following modes : Screen Off

➟

Screen On

➟

Screen Off.

• Audio operation is maintained and

only the Screen will be turned Off.

• In the Screen Off state, press any

button to turn the Screen On again.

(9)

SCAN

• Radio mode

- Short press : Previews each

broadcast for 5 seconds each.

- Press and hold : Previews the

broadcasts saved in Preset

[1]

[6]

for 5 seconds each.

- Press the

[SCAN]

button again

to continue listening to the cur-
rent frequency.

- XM Radio does not support the

Preset scan feature.

• CD, USB, My Music* mode

- Short press : Previews each

song (file) for 10 seconds each.

- Press the

[SCAN]

button again

to continue listening to the cur-
rent song (file).

* if equipped

(10)

SETUP/CLOCK

• Moves to the Display, Sound,

Clock, Phone, System setting
menu.

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Elantra 2017

Reviews:

Brands by name

Popular brands

Hyundai Elantra 2017, Owner'S Manual

Search results

Summary of Contents for Elantra 2017

Reviews:

Brands by name

Popular brands