manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 404

5-84

Driving your vehicle

SCC Front Radar Sensor

The Smart Cruise Control uses a
radar to detect distance to the vehi-
cle ahead.

OLF054203N

If the vehicle ahead (vehicle
speed:

less than 20 mph

(30km/h)) disappears to the next
lane, the warning chime will
sound and a message will
appear. Adjust your vehicle
speed for vehicles or objects
that can suddenly appear in
front of you by depressing the
brake pedal.
Always pay attention to the road
condition ahead.

CAUTION

OAD055017

(Continued)

•

If the warning chime sounds,
depress the accelerator or
brake pedal to actively adjust
the vehicle speed, and the dis-
tance to the vehicle ahead.

•

Even if the warning chime is
not activated, always pay
attention to the driving condi-
tions to prevent dangerous
situations from occurring.

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands