manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 496

7-36

Maintenance

Information 

If the vehicle is operated in extremely
dusty or sandy areas, replace the ele-
ment more often than the usual rec-
ommended intervals (refer

to

"Maintenance Under Severe Usage
Conditions" in this chapter).

• Do not drive with the air cleaner

filter removed. This will result in
excessive engine wear.

• When removing the air cleaner

filter, be careful that dust or dirt
does not enter the air intake, or
damage may result.

• Use HYUNDAI genuine parts,

use of non-genuine parts could
damage the air flow sensor.

NOTICE

i

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands