manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 383

5-63

Dri
ving y

our v

ehicle

LKAS activation

• The LKAS screen will appear on

the SCC/LKAS screen of the LCD
display if the system is activated.

• When both lane lines are detected

and all the conditions to activate
the LKAS are satisfied, a green
steering wheel indicator will illumi-
nate and the LKAS indicator light
will change from white to green.
This indicates that the LKAS sys-
tem is in the ENABLED state and
the steering wheel will be able to
be controlled.

• If the system detects the left lane

line, the left lane line color will
change from gray to white.

• If the system detects the right lane

line, the right lane line color will
change from gray to white.

• Both lane lines must be detected

for the system to fully activate.

5

■

Lane line undetected

■

Lane line detected

OAD055101N

OAD055052N/OAD055080N

The Lane Keeping Assist
System is a system to prevent
the driver from leaving the lane.
However, the driver should not
solely rely on the system but
always check the road condi-
tions when driving.

WARNING  

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands