Hyundai Elantra 2017 Owner'S Manual Download Page 143

Page: 143 / 586

3-49

Con

enient f

eatur

es of y

our v

ehicle

Sunshade

The sunshade will open automatical-
ly with the sunroof when the glass
panel moves. If you want it closed,
move the sunshade manually.

The sunroof is made to slide
together with the sunshade. Do
not leave the sunshade closed
while the sunroof is open.

Resetting the sunroof

Sunroof needs to be reset if the fol-
lowing occurs :
- Battery is discharged or discon-

nected or the related fuse has been
replaced or disconnected

- The one-touch sliding function of

the sunroof does not normally oper-
ate

Reset procedure :
1. Place the ignition switch to the ON

position or start the engine. It is
recommended to reset the sunroof
while the engine is running.

2. Push the control lever forward. The

sunroof will close completely or tilt
depending on the condition of the
sunroof.

3. Release the control lever when the

sunroof stops moving.

4. Push the control lever forward

about 10 seconds.

- When the sunroof is in the closed

position :

The glass will tilt and slightly

move up and down.

- When the sunroof is in the tilt

position:

The glass will slightly move up

and down.

Do not release the lever until the
operation is completed.
If you release the lever during opera-
tion, start the procedure again from
step 2.

NOTICE

OAD045037

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Elantra 2017

Reviews:

Brands by name

Popular brands

Hyundai Elantra 2017, Owner'S Manual

Search results

Summary of Contents for Elantra 2017

Reviews:

Brands by name

Popular brands