manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 162

3-68

Convenient features of your vehicle

Shift indicator pop-up 
(if equipped)

The pop-up displays the current gear
position selected for 2 seconds
(P/R/N/D).

Icy road warning light

This warning light is to warn the driv-
er the road may be icy.

When the temperature on the out-
side temperature gauge is approxi-
mately below 40°F (4°C), the Icy
Road Warning Light and Outside
Temperature Gauge blinks 5 times,
and then illuminates. Also, the warn-
ing chime sounds 1 time.

Information 

If the icy road warning light appears
while driving, you should drive more
attentively and safely refraining from
over-speeding, rapid acceleration,
sudden braking or sharp turning, etc.

i

OTL045134/OTL045135

■ 

Supervision cluster
(Type A)

■ 

Supervision cluster
(Type B)

OAD045186N

■

Conventional cluster

■ 

Supervision cluster
(Type A)

■ 

Supervision cluster
(Type B)

OAD055094L/OAD055095L

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands