manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 290

4-38

Multimedia System

Category

Press the 

[CAT/FOLDER]

button.

• The display will indicate the catego-

ry menus, highlight the category
that the current channel belongs to.

• In the Category List Mode, press

the

[CAT/FOLDER]

button to navi-

gate category list.

• Press the tune knob to select the

lowest channel in the highlighted
category.

• If channel is selected by selecting

category, then the “CATEGORY”
icon is displayed at the top of the
screen.

Preset

Press the 

[1]

~ 

[6]

button

• Short press : Plays the channel

saved in the corresponding button.

• Press and hold : Pressing and

holding the desired button from 

[1]

~ 

[6]

will save the current broad-

cast to the selected button and
sound a BEEP.

Information

- Troubleshooting

1. Antenna Error

If this message is displayed, the
antenna or antenna cable is broken
or unplugged. Please consult with
your Hyundai dealership. 

2. No Signal

If this message is displayed, it
means that the antenna is covered
and that the SiriusXM Satellite
Radio signal is not available.
Ensure the antenna is uncovered
and has a clear view of the sky.

Tune

• Rotate 

TUNE

knob : Changes the

channel number or scrolls catego-
ry list.

• Press 

TUNE

knob : Selects the

menu.

Menu : SiriusXM Radio

Press the 

[MENU]

button.

Info (Information) : 

[1]

Button

Displays the Artist/Song info of the
current song.

i

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands