manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 398

5-78

Driving your vehicle

3. Push the toggle switch down

(SET-), and release it at the
desired speed. The Set Speed
and Vehicle-to-Vehicle Distance
on the LCD display will illuminate.

4. Release the accelerator pedal.

The desired speed will automati-
cally be maintained.

If there is a vehicle in front of you, the
speed may decrease to maintain the
distance to the vehicle ahead.
On a steep grade, the vehicle may
slow down or speed up slightly while
going uphill or downhill.

Information 

Vehicle speed may decrease on an
upward slope and increase on a down-
ward slope. 

To increase Smart Cruise
Control set speed

Follow either of these procedures:
• Push the toggle switch up (RES+),

and hold it. Your vehicle set speed
will increase by 5 mph (10 km/h).
Release the toggle switch at the
speed you want.

• Push the toggle switch up (RES+),

and release it immediately. The
cruising speed will increase by 1.0
mph (1.0 km/h) each time you
move the toggle switch up in this
manner.

• You can set the speed to 100 mph

(160 km/h).

i

OAD055020

OAD055021

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands