manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 391

5-71

Dri
ving y

our v

ehicle

5

To set Cruise Control speed 

1. Press the CRUISE button on the

steering wheel to turn the system
on. The "CRUISE" indicator will
illuminate.

2. Accelerate to the desired speed,

which must be more than 20 mph
(30 km/h).

3. Push the toggle switch (1) down

(SET-), and release it. The SET
indicator light will illuminate.

4. Release the accelerator pedal.

Information 

On a steep slope, the vehicle may
slightly slow down or speed up, while
driving uphill or downhill.

To increase Cruise Control
speed 

• Push the toggle switch (1) up

(RES+) and hold it, while monitor-
ing the SET speed on the instru-
ment cluster.
Release the toggle switch when
the desired speed is shown and
the vehicle will accelerate to that
speed.

• Push the toggle switch (1) up

(RES+) and release it immediately.
The cruising speed will increase
1.0 mph (1.6 km/h) each time the
toggle switch is operated in this
manner.

i

OAD055019

OAD055020

OAD055021

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands