manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 169

3-75

Con

v

enient f

eatur

es of y

our v

ehicle

3

Automatic Emergency
Braking (AEB) Warning
light 
(if equipped)

This warning light illuminates :

• When the AEB system is turned off.
• When the radar sensor or cover is

blocked with dirt or snow. Check
the sensor and cover and clean
them by using a soft cloth.

• When there is a malfunction with

AEB. In this case, have your vehi-
cle inspected by an authorized
HYUNDAI dealer.

Headlight Warning
Light

This warning light illuminates:

This warning light illuminates if one
of the exterior bulbs (headlamp, tail-
lamp, foglamp, etc.) is not operating
properly. One of the bulbs may need
to be replaced. If the vehicle is
equipped with LED headlamps, have
the vehicle inspected by an author-
ized HYUNDAI dealer.

Information 

When replacing the bulb, use the same
wattage bulb. 

For

more information, refer

to

"BULB WATTAGE" in chapter 8.

Adaptive Front Lighting
System (AFLS) Warning
Light (if equipped)

This warning light blinks:

• Once you set the Engine Start/Stop

Button to the ON position.
- It illuminates for approximately 3

seconds and then goes off.

• When there is a malfunction with

the AFLS.

If there is a malfunction with the
AFLS:

1. Drive carefully to the nearest safe

location and stop your vehicle.

2. Turn the engine off and restart the

engine. If the warning light remains
on, have your vehicle inspected by
an authorized HYUNDAI dealer.

i

AFLS

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands