manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 387

5-67

Dri
ving y

our v

ehicle

LKAS Malfunction

If there is a problem with the system
a message will appear for a few sec-
onds. If the problem continues the
LKAS failure indicator will illuminate.

LKAS failure indicator

The LKAS failure indicator (yellow)
will illuminate if the LKAS is not
working properly. Have your vehicle
checked by an authorized HYUNDAI
dealer.

When there is a problem with the
system do one of the following:

• Turn the system on after turning

the engine off and on again.

• Check if the ignition switch is in the

ON position.

• Check if the system is affected by

the weather. (ex: fog, heavy rain,
etc.)

• Check if there is foreign matter on

the camera lens.

If the problem is not solved, have
your vehicle checked by an author-
ized HYUNDAI dealer.

5

OAD055107N

OAD055025

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands