manualshive.com logo in svg

Hyundai Elantra 2017, Owner'S Manual

Share
Download
Hyundai Elantra 2017 Owner'S Manual Download Page 132

3-38

Convenient features of your vehicle

Standard programming
To train most devices, follow these
instructions:
1. For first-time programming, press

and hold the two outside buttons,
HomeLink

®

Channel 1 and

Channel 3 Buttons, until the indi-
cator light begins to flash (after 20
seconds). Release both buttons.
Do not hold the buttons for longer
than 30 seconds.

2. Position the end of your hand-held

transmitter 1-3 inches (2-8 cm)
away from the HomeLink

®

buttons

while keeping the indicator light in
view.

3. Simultaneously press and hold

both the HomeLink

®

and hand-

held transmitter button. DO NOT
release the buttons until step 4
has been completed.

4. While continuing to hold the but-

tons the red Indicator Status LED
will flash slowly and then rapidly
after HomeLink

®

successfully

trains to the frequency signal from
the hand-held transmitter. Release
both buttons.

5. Press and hold the just-trained

HomeLink

®

button and observe

the red Status Indicator LED. If the
indicator light stays on constantly,
programming is complete and
your device should activate when
the HomeLink

®

button is pressed

and released.

6. To program the remaining two

HomeLink

®

buttons, follow steps 2

through 5.

Gate operator & Canadian program-
ming
During programming, your handheld
transmitter may automatically stop
transmitting. Continue to press the
Integrated HomeLink

®

Wireless

Control System button (note 
steps 2 through 4 in the Standard
Programming portion of this docu-
ment) while you press and re-press
("cycle") your handheld transmitter
every two seconds until the frequen-
cy signal has been learned. The indi-
cator light will flash slowly and then
rapidly after several seconds upon
successful training.

Operating HomeLink

®

To operate, simply press and release
the programmed HomeLink

®

button.

Activation will now occur for the
trained device (i.e. garage door
opener, gate operator, security sys-
tem, entry door lock, home/office
lighting, etc.). For convenience, the
hand-held transmitter of the device
may also be used at any time.

Summary of Contents for Elantra 2017











































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands