Hyundai Seasall S220P, Workshop Manual

Page: 25 / 150

Engine Mechanical System
24
Timing System
Installation
Applying sealant (A) on the groove and checking the O-
rings (B) seated firmly, install the chain case
assembly(C) within fifteen minutes.
2. Tighten the chain case mounting bolts with the
specified torque.
Tightening Torque:
13.7 ~ 17.7Nm (1.4 ~ 1.8kgf.m, 10.1 ~ 13.0lb-ft) -
6×16(
★
)
19.6 ~ 25.5Nm (2.0 ~ 2.6kgf.m, 14.5 ~ 18.8lb-ft) -
8×35(
▲)
3. Install the water pump(A) with a new gasket.
Tightening Torque:
9.8 ~ 11.8Nm (1.0 ~ 1.2kgf.m, 7.2 ~ 8.7lb-ft) - 6×16(
★
)
4. Install the high pressure pump.
5. Applying sealant, install the upper head seal.
6. Install the high pressure fuel pump sprocket (A).
Tightening Torque:
64.7 ~ 74.5Nm (6.6 ~ 7.6kgf.m, 47.7 ~ 55.0lb-ft)
7. Install the timing chain (B), aligning the timing marks
(E) on the camshaft sprocket(C) and the crankshaft
sprocket (D).
8. After timing chain's installation, fix the camshaft
system by using the SST (00200-0T006).
9. Install the chain guide (F) and the tensioner lever (G).