Hyundai Seasall S220P, Workshop Manual, Page: 138 / 150

Fuel System
137 Fuel Delivery System
5. Remove the high pressure fuel pipe (C).
6. Remove the engine oil filter (D)
7. Unscrew the three high pressure fuel pump mounting
bolts.
8. Remove the glow control module (A) .
9. Remove the service cover (B).
10. Remove the sprocket tightening nut (A).
11. Install the fixing plate (A) [SST No.: 00200-0T016]
on the timing case. .
12. Install the supporter (B) [SST No.: 00200-0T016] on
the sprocket with the bolts (A) [SST No.:
00200-0T016]. .
13. Push the pump shaft from the sprocket with rotating
the main bolt (C) [SST No.: 00200-0T016] clockwise,
and then remove the high pressure fuel pump from the
engine. .
Installation
1 . Installation is reverse of removal.
✍
NOTICE
When installing the high pressure fuel pipe, apply
the specified tightening torques with the special
service tool [SST No.: 00200-0T015].
---------------------------------------------------------------------
High pressure fuel pump installation bolts:
19.6 ~ 26.5 N.m (2.0 ~2.7 kgf.m, 14.5 ~ 19.5 lb-ft)
High pressure fuel pipe installation nut:
24.5 ~ 28.4 N.m (2.5 ~2.9 kgf.m, 18.1 ~ 21.0 lb-ft)
---------------------------------------------------------------------