Hughes Direcway DW6000, Installation Manual

Page: 32 / 214

Chapter 2 • Installing the DW6000 using satellite-based commissioning (SBC)
10
1033295-0001 Revision A
System pre-installation
Check to be sure both you and the customer have fulfilled all
system and site requirements before beginning the installation.
Installation PC requirements The installer laptop PC must fulfill the following requirements.
•
Ethernet enabled network interface card (NIC) and Ethernet
cable.
•
Windows 98 SE, Windows ME, Windows 2000, or Windows
XP operating system with DHCP configured to automatically
obtain IP addresses. See Appendix C –
Configuring the
installer laptop for IP addressing, on page 141.
•
Internet Explorer 5.5 or 6.0 and that the browser is not using
any proxy settings.
•
Customer PC qualification tool disk or CD.
•
Dial-out modem if not using satellite-based commissioning
(SBC).
•
Installer software installed if not using SBC. See DW6000
items required for installation on page 14.
•
The latest version of the satellite-based commissioning
configuration file (sbc.cfg) if instructed to install it.
Customer installation
requirements
The customer must provide a computer with:
•
Operating system
– PC: Windows 98 SE, Windows Me, Windows 2000,
Windows XP
– MAC: 9.0 - 10.2 (excludes 10.0)
•
Processor
– PC: Pentium II 333 Mhz or faster
– MAC: 300 Mhz or faster
•
Memory
– PC: 64MB RAM, Windows 98SE and Me; 128MB RAM
Windows 2000 and XP.
– MAC: 128MB
•
Free hard drive space
– PC: 100MB
– MAC: 150MB
•
A functioning 10/100 Ethernet interface installed on at least
one computer. This is needed to ensure the customer can surf
before you leave.