1
CopperJet 810 Mounting Bracket
Installation Instructions
Document Number 4800-A2-GN13-00
September 2002
The CopperJet 810 mounting bracket (Feature Number 4800-F1-013) can be used to
fasten the CopperJet 810 Bridge/Router to a wall, or to the side or underside of a desk.
Installing the Bracket on Wall or Side of Desk
Procedure
To attach the mounting bracket to a wall or to the side of a desk:
1. Fasten either side of the bracket to the wall or desk where the CopperJet 810 is to
be installed. Use screw anchors (not provided) in drywall or other soft materials.
02-17323
