Hughes Direcway DW6000, Installation Manual, Page: 188 / 214

Appendix E • Using the Fallback Updater utility
166
1033295-0001 Revision A
6. Select Use the following IP address .
7. Type
192.168.0.2
in the IP address field.
8. Type
255.255.255.252
in the Subnet mask field.
9. Click OK .
Updating the
fallback.bin file
Follow the steps below to update the fallback.bin file. During the
update process, the files containing the current software release
are transferred to the DW6000 and the files containing the older
software release are deleted from the DW6000.
1. Confirm the installer laptop is connected to the DW6000 with
an Ethernet cable.
2. Perform a ping test to confirm the installer laptop is properly
connected to the DW6000:
a. Open a DOS command prompt on the installer laptop.
b. Type
ping 192.168.0.1
.
c. Press E
NTER
.
Continue with step 3 if the ping test is successful. Refer to
Troubleshooting on page 168 if the ping test fails. A
successful ping test is shown in Figure 158. A failed ping test
is shown in Figure 159.
Note: You do not need to enter information in the
Default
gateway
,
Preferred DNS server
, or
Alternate DNS server
fields.
Figure 158: Successful ping