Hughes Direcway DW6000, Installation Manual, Page: 98 / 214

Chapter 4 • DW6000 LEDs and troubleshooting
76
1033295-0001 Revision A
Fatal error indication
If the Power LED is off and one or more of the other LEDs is
flashing, the unit may have to be replaced. If there is not fatal
error indication, proceed to the next troubleshooting step.
First try power cycling the DW6000 by unplugging the power
cord from the power source, waiting 10 seconds, and then
plugging it back in. The unit may recover.
Table 7: DW6000 LED operation
LED Appearance Description
LAN Solid blue LAN is connected and usable
Flashing blue There is transmit or receive activity on the
LAN
Transmit Solid blue OK
Flashing blue Transmitting frames
Off Condition preventing transmission
Receive Solid blue OK
Flashing blue Receiving frames
Off Condition preventing acquisition of outroute
(preventing receipt)
System Solid blue (DW6000) System is operational
Flashing blue (DW6002) System is operating normally and VADB
mode is enabled
Off Condition preventing full operation
Power Solid blue Power is on and unit is functioning normally
Blinking Unit is operating with the fallback.bin
(backup) version of software
Off No power
Off with other LED flashing Fatal error
Note:
If the fatal error indication continues, the unit must
be replaced. Please contact Technical Support.