Huawei OceanStor N8500 T Series Installation Manual Download

Page: 164 / 375

Figure 6-37

Indicators on the front and rear panels of an SUD

Table 6-4

Checklist of the indicators on the front and rear panels of an SUD

No.

Indicator Name

Status and Description

Power running/alarm
indicator

Green on: indicates that the power runs normally.

Blinking green: The power supply is normal, but is
not providing power to the device.

Red on: A power alarm is generated on the power
supply.

Blinking red: Undervoltage (including AC power-
off) and overvoltage occur.

Off: No external power is input.

Operating or alarm
indicator of the fan

Green on: indicates that the fan runs normally.

Red on: The fan is faulty.

Off: The fan is not powered on.

OceanStor N8500 Clustered NAS Storage System
Installation Guide (for T Series V100R005)

6 N8500 Installation (with S5500T Storage System as the

Storage Unit)

Issue 02 (2015-09-22)

Huawei Proprietary and Confidential

155

Summary of Contents for OceanStor N8500 T Series
























































































































































































































































































































































































Search results

Summary of Contents for OceanStor N8500 T Series

Reviews:

Related manuals for OceanStor N8500 T Series

Brands by name

Popular brands

Huawei OceanStor N8500 T Series, Installation Manual

Search results

Summary of Contents for OceanStor N8500 T Series

Reviews:

Related manuals for OceanStor N8500 T Series

Brands by name

Popular brands