IDS1000-A Air-Cooled Container Data Center
All-in-One Maintenance Guide
5 Parts Replacement
Issue 01 (2016-01-10)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
117
Skill requirement: weak-current engineer
Procedure
Step 1
Remove the emergency door release button.
1.
Remove screws securing the emergency door release button, as shown by 1 in
2.
Remove the glass panel of the emergency door release button, as shown by 2 and 3 in
3.
Remove screws securing the base, as shown by 4 in
4.
Disconnect cables and remove the emergency door release button.
Figure 5-34
Removing the emergency door release button
Step 2
Install a new emergency door release button
1.
Connect cables.
2.
Tighten screws on the base, as shown by 1 in
3.
Install the glass panel, as shown by 2 and 3 in
4.
Tighten screws, as shown by 4 in
Figure 5-35
Installing the emergency door release button
Step 3
Check that the new emergency door release button is working properly.