Huawei iBAT 2.0-CIM01C2 User Manual Download | Manualshive

Page: 40 / 79

background image

iBAT 2.0-CIM01C2
User Manual

4 Connecting Cables

Issue 07 (2019-01-02)

Copyright © Huawei Technologies Co., Ltd.

34

4.2 Installing Cables (UPS Scenario)

Context

This section describes how to connect the CIM power cable to the adapter and the CIM
communications cable to the UPS in the UPS scenario.

Figure 4-3

CIM and BIM networking (in the UPS scenario)

Procedure

Step 1

Connect the cable between the CIM and the Hall effect sensor.



When a CIM manages multiple battery strings, first connect the Hall effect sensors on the positive
and negative cables of battery string 1 respectively to the corresponding ports on the CIM. Then
connect the Hall effect sensors on battery string 2 to the CIM in the same way, and so on. The
following describes cable connections by using one battery string as an example.



If the battery string is configured with the neutral wire, measure the currents of the positive

and

negative battery string cables. If the battery string is not configured with the neutral wire, measure
the current of either the positive

or

negative battery string cable.



If the battery string is configured with a neutral wire and each of the positive and
negative battery string cables connects to one Hall effect sensor, connect the Hall effect
sensor on the positive battery string terminal side to the HALL_1 current monitoring port
on the CIM, and connect the Hall effect sensor on the negative battery string terminal
side to the HALL_2 current monitoring port on the CIM.

«
...
38
39
40
41
42
...
»

Summary of Contents for iBAT 2.0-CIM01C2
















































































Reviews:

No comments

Related manuals for iBAT 2.0-CIM01C2

Brand: WAGER Pages: 22

Brand: M & I Instruments Pages: 2

Brand: Idexx Pages: 6

Brand: IDEAL INDUSTRIES Pages: 10

Brand: M-system Pages: 5

Comark Diligence 600

Brand: Fluke Pages: 61

Brand: Lutron Electronics Pages: 20

Brand: Rion Pages: 4

Brand: Keithley Pages: 338

Friendly Digital Piano Forte PV35

Brand: Kawai Pages: 102

Brand: YOSensi Pages: 27

Brand: Scheppach Pages: 20

Brand: Tektronix Pages: 30

Brand: Omega Pages: 24

Brand: B meters Pages: 10

Brand: HW Group Pages: 19

Brand: Lasertec Pages: 28

Brand: janitza Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands