Huawei iBAT 2.0-CIM01C2 User Manual Download Page 23

Page: 23 / 79

iBAT 2.0-CIM01C2
User Manual

2 Overview

Issue 07 (2019-01-02)

Indicator Color

Silk
Screen

Status

Description

Alarm

Red

ALM

Off

The BIM is not faulty.

Blinking at
super short
intervals



Network parameters are being
cleared.



The BIM is blinking.

Steady on



The BIM is measuring the
battery internal resistance.



The BIM is faulty.



Communication with the CIM
times out.



No network is connected. (The
BIM is waiting to connect to a
network.)



If an indicator blinks at long intervals, it is blinking on for 1s and then off for 1s.



If an indicator blinks at super short intervals, it is blinking at 10 Hz, that is, on for 0.05s and then off
for 0.05s.



If both the red and green indicators light up at the same time, orange effect may be generated.

Networking Switch

Table 2-15

Networking switch description

Name

Definition

Function

Button pressing

Press the button for less
than 5s.

Searches for and joins a network if there is no
network. Initializes parameters of a network
if there is a network.

Button holding
down

Hold down the button
for more than 5s.

Clears the present network and resets the
wireless module.

Summary of Contents for iBAT 2.0-CIM01C2
















































































Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands

Huawei iBAT 2.0-CIM01C2, User Manual

Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands