Huawei iBAT 2.0-CIM01C2 User Manual Download Page 66

Page: 66 / 79

iBAT 2.0-CIM01C2
User Manual

9 Maintenance

Issue 07 (2019-01-02)

Item

Expected Result

Troubleshooting

BIM connection



The BIM is attached
firmly.



All BIM cables are
securely connected.



No BIM cable
deteriorates and the
insulation layer does not
crack.



Secure the BIM again.



Verify that all BIM
cables are securely
connected.



Replace the faulty cable.

CIM connection



The CIM is attached
firmly.



The cable to the PoE port
is connected securely.



If a cable connects to the
COM port, check that the
cable connection is
secure.



If a cable connects to the
BCB port, check that the
cable connection is
secure.



The cable to the HALL
current monitoring port
is connected securely.



Secure the CIM again.



Reconnect the cable to
the PoE port.



Reconnect the cable to
the COM port.



Reconnect the cable to
the BCB port.



Reconnect the cable to
the HALL current
monitoring port.

If the fault persists, contact Huawei technical support.

Summary of Contents for iBAT 2.0-CIM01C2
















































































Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands

Huawei iBAT 2.0-CIM01C2, User Manual

Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands