iBAT 2.0-CIM01C2
User Manual
5 System Commissioning
Issue 07 (2019-01-02)
Copyright © Huawei Technologies Co., Ltd.
45
Figure 5-4
Battery Curve
----End
5.2 Setting Parameters on the ECC800 WebUI (ECC800
Scenario)
Procedure
Step 1
Log in to the ECC800 WebUI as an administrator.
Step 2
Choose
Monitoring
>
Power Distribution
>
iBOXn
>
Running Parameters
.
Step 3
Set the following parameters and retain default values for other parameters.
Table 5-1
Setting iBOX parameters
Parameters
Description
Remarks
iBOX single battery qty.
Total number of batteries
monitored by the iBOX.
Set according to the battery
parameters planned by the
customer.
Batt installation time
Actual time at which
batteries are installed.
N/A
Battery string capacity
Capacity of a single battery
multiplied by the number of
battery strings.
Obtain the battery capacity
from the battery label or
document.
Current source
Select a Hall effect sensor
(xxx A).
The actual specifications of
the Hall effect sensor will
apply.
The actual specifications of
the Hall effect sensor
prevail.
