Huawei iBAT 2.0-CIM01C2 User Manual Download Page 4

Page: 4 / 79

iBAT 2.0-CIM01C2
User Manual

About This Document

Issue 07 (2019-01-02)

iii

Symbol

Description

Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.

NOTICE

is used to address practices not related to

personal injury.

Calls attention to important information, best practices
and tips.

NOTE

is used to address information not related to

personal injury, equipment damage, or environment
deterioration.

Change History

Changes between document issues are cumulative. The latest document issue contains all
updates made in previous issues.

Issue 07 (2019-01-02)

Updated the monitoring interface.

Issue 06 (2018-04-23)

Updated the monitoring interface.

Issue 05 (2017-07-30)

Optimized the document architecture.

Issue 04 (2017-05-10)

Added the description about battery test operations.

Issue 03 (2017-03-31)

Optimized the content.

Issue 02 (2016-08-30)

Updated the BIM fastener.

Issue 01 (2016-06-17)

This issue is the first official release.

Summary of Contents for iBAT 2.0-CIM01C2
















































































Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands

Huawei iBAT 2.0-CIM01C2, User Manual

Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands