Huawei iBAT 2.0-CIM01C2 User Manual Download Page 3

Page: 3 / 79

iBAT 2.0-CIM01C2
User Manual

About This Document

Issue 07 (2019-01-02)

About This Document

Purpose

This document describes the iBAT 2.0-CIM01C2, the intelligent battery monitoring system in
a data center, in terms of its features, installation, networking, and maintenance.

Figures used in this document are for reference only.

CIM01C2 corresponds to the original CIM01C02.

Intended Audience

This document is intended for:



Sales engineers



Technical support engineers



System engineers



Hardware installation engineers



Commissioning engineers



Data configuration engineers



Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury.

Summary of Contents for iBAT 2.0-CIM01C2
















































































Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands

Huawei iBAT 2.0-CIM01C2, User Manual

Search results

Summary of Contents for iBAT 2.0-CIM01C2

Reviews:

Related manuals for iBAT 2.0-CIM01C2

Brands by name

Popular brands