iBAT 2.0-CIM01C2
User Manual
7 iBAT Networking Configuration
Issue 07 (2019-01-02)
Copyright © Huawei Technologies Co., Ltd.
54
Figure 7-6
Schematic diagram
Replacing iBATs in Batches
Figure 7-7
Replacing iBATs in batches
Start No.
: Indicates the start reference number corresponding to the operation type
Batch-replace iBAT
.
End No.
: Indicates the end reference number corresponding to the
operation type
Batch-replace iBAT
.
Example: There are six iBATs in the network and they are numbered 1, 2, 3, 4, 5, and 6.
Choose
Batch-replace iBAT
, set
Start No.
to 2, and set
End No.
to 5. After the operation, the
network parameters of the number 2–5 iBATs are cleared, and numbers 2–5 are reserved.
Figure 7-8
Schematic diagram
