HP E8402A, User And Service Manual, Page: 236 / 249

238 Rack Mounting and Option Installation Appendix B
5. Remove the chassis section from the intermediate section (Figure
B-88). (The chassis section will be connected to the mainframe in
Step 7.) Slide the intermediate section back into the stationary
section.
6. Attach the stationary section to the rack’s front inside rail through the
channel nuts. Use two m5x12 flat head screws. Attach the stationary
section to the rear inside rail using two m5x12 pan-head screws
(Figure B-9).
7. Attach the rack mount adapters to the mainframe using the eight
m5x8 pan head screws provided. To mount the mainframe flush with
the rack front, begin with the 3rd hole from the front of the adapter
(Figure B-10).
The mainframe can be recess mounted up to 270.7 mm (10.6 inches)
in approximately 12.3 mm (1/2 inch) increments. Note that in some
recess positions, the front screw attaching the rack slide adapter may
have to be removed.
Figure B-8. Removing the Rack Slide Chassis Section from the Intermediate Section.
Depress From Back
Side To Remove
Rack Front Rack Rear
Stationary Section Stationary Section Chassis Section
(Right Rack Slide Shown)
Figure B-9. Installing the Rack Slide Stationary Sections.
Mounting Holes When Using
the VXI Plug&Play Compliant Adapters
(Left Rack Slide Shown)
m5x12 Pan Head Screws
(Standard Adapter Kit)
m5x12 flat head screws
(Standard Adapter Kit)
Rack Front Rack Rear