HP E8402A, User And Service Manual, Page: 108 / 249

110 Programming the Enhanced Monitor Chapter 3
STATus:QUEStionable:TEMPerature:CONDition?
The STATus:QUEStionable:TEMPerature:CONDition? query returns an integer
representing the contents of the condition register associated with the TEMPerature
status group.
The condition register continuously monitors the hardware and firmware status of
the instrument. There is no latching or buffering for this register; it is updated in real
time. Condition registers are read-only.
The following table describes each bit in the TEMPerature status group:
Returned Data
Comments
A bit is set when a slot temperature is over the user-specified limit.
Reset Condition
*RST does not affect the status system.
Related
Commands
STATus:QUEStionable:TEMPerature:EVENt?,
STATus:QUEStionable:TEMPerature:ENABle,
STATus:QUEStionable:TEMPerature:LIMit
Bit Description Decimal Value
0 Slot 0 1
1 Slot 1 2
2 Slot 2 4
3 Slot 3 8
4 Slot 4 16
5 Slot 5 32
6 Slot 6 64
7 Slot 7 128
8 Slot 8 256
9 Slot 9 512
10 Slot 10 1024
11 Slot 11 2048
12 Slot 12 4096
13 AMBient 8192
14 Power supply 16384
15 Unused 32768
Type Range Default Description
int16 0 - 32767 none Bit mask indicating which conditions are set (1) or cleared (0)
for the TEMPerature status group.