HP E8402A, User And Service Manual, Page: 132 / 249

134 Programming the Enhanced Monitor Chapter 3
SYSTem:COMMunicate:SERial:ERESponse < eresponse >
SYSTem:COMMunicate:SERial:ERESponse?
SYSTem:COMMunicate:SERial:ERESponse sets the state of immediate error
reporting. Parameter choices are: ON and OFF. If ON, the Enhanced Monitor’s
response queue is emptied and transmitted over the RS-232 interface at any carriage
return or line feed received (after the command is parsed and acted on). This is useful
when using a "dumb" terminal connected to the mainframe so that errors are
immediately apparent. If set to OFF, the error queue remains intact unless a
SYSTem:ERRor? is executed.
Note: any word serial errors are also emptied.
SYSTem:COMMunicate:SERial:ERESponse? returns an integer (0 or 1)
representing the state of immediate error reporting.
Parameters
Returned Data
Reset Condition
*RST resets ERESponse to the last value saved by the SYST:NVS command.
Related
Commands
SYSTem:COMMunicate:PRESet:TERMinal
Name Type Range Default Description
<
eresponse>
Boolean ON, OFF,
0, 1 On Immediate error reporting. 0 is OFF, and 1
is ON.
Type Range Description
Boolean 0, 1 Immediate error reporting. 0 is OFF, 1 is ON