HP AA979A - StorageWorks SAN Switch 2/8V, Administrator'S Manual, Page: 71 / 465

Fabric OS 5.3.0 administrator guide 73
password history setting to select a recently-used password. The
MinPasswordAge
policy is not
enforced when an administrator changes the password for another user.
•
MaxPasswordAge
Specifies the maximum number of days that can elapse before a password must be changed, and is
also known as the password expiration period.
MaxPasswordAge
values in range from 0 to 999. The
default value is zero. Setting this parameter to zero disables password expiration.
•
Warning
Specifies the number of days prior to password expiration that a warning about password expiration is
displayed. Warning values range from 0 to 999. The default value is 0 days.
NOTE: When
MaxPasswordAge
is set to a non-zero value,
MinPasswordAge
and
Warning
must be
set to a value that is less than or equal to
MaxPasswordAge
.
Upgrade and downgrade considerations
If you are upgrading from a 5.0.x environment to 5.3.0, the existing password databases do not contain
the state information that implements password expiration. So, when the password expiration policy is first
set after an upgrade to 5.2.x, any user who has not changed their password will have their password
expiration period set to the maximum password expiration period. You must explicitly define the password
expiration for users who have not performed a password change subsequent to the upgrade.
For example:
•
March 1st—Using a 5.0.x Fabric OS release. User A changes her password.
• April 1—Upgrade to 5.3.0
• May 1—User B changes his password.
• June 1—The password configuration parameter MaxPasswordAge is set to 90 days.
User A’s password will expire on September 1. User B’s password will expire on August 1.
How to set the account lockout policy
The account lockout policy disables a user account when that user exceeds a specified number of failed
login attempts, and is enforced across all user accounts. You can configure this policy to keep the account
locked until explicit administrative action is taken to unlock it, or the locked account can be automatically
unlocked after a specified period. Administrators can unlock a locked account at any time.
A failed login attempt counter is maintained for each user on each switch instance. The counters for all user
accounts are reset to zero when the account lockout policy is enabled. The counter for an individual
account is reset to zero when the account is unlocked after a
LockoutDuration
period expires.
Note that the account locked state is distinct from the account-disabled state.
Use the following attributes to set the account lockout policy:
•
LockoutThreshold
Specifies the number of times a user can attempt to login using an incorrect password before the
account is locked. The number of failed login attempts is counted from the last successful login.
LockoutThreshold
values range from 0 to 999, and the default value is 0. Setting the value to 0
disables the lockout mechanism.
•
LockoutDuration
Specifies the time, in minutes, after which a previously locked account is automatically unlocked.
LockoutDuration
values range from 0 to 99999, and the default value is 30. Setting the value to 0
disables lockout duration, and would require a user to seek administrative action to unlock the account.
The lockout duration begins with the first login attempt after the LockoutThreshold has been reached.
Subsequent failed login attempts do not extend the lockout period.