manualshive.com logo in svg

HP AA979A - StorageWorks SAN Switch 2/8V, Administrator'S Manual, Page: 52 / 465

Share
Download
HP AA979A - StorageWorks SAN Switch 2/8V Administrator'S Manual Download Page 52

52

Performing basic configuration tasks

A message displays, verifying that the track changes feature is on:

The output from the track changes feature is dumped to the system message log for the switch. 

3.

Use the 

errDump

 or 

errShow

 command to view the log.

Items in the system message log created from the track changes feature are labeled TRCK: 

How to display the status of the track changes feature

1.

Connect to the switch and log in as 

admin

.

2.

Enter the 

trackChangesShow

 command. 

The status of the track changes feature is displayed as either on or off. The display includes whether the 

track changes feature is configured to send SNMP traps:

How to view the switch status policy threshold values

1.

Connect to the switch and log in as admin.

2.

Enter the 

switchStatusPolicyShow

 command at the command line.

Whenever there is a switch change, an error message is logged and an SNMP connUnitStatusChange 

trap is sent. 

HP StorageWorks 4/16 SAN Switch and 4/8 SAN Switch, SAN Switch 2/8V, SAN 

Switch 2/16V, SAN Switch 2/32, SAN Switch 4/32, 4/64 SAN Switch, 4/32B SAN 

Switch and 400 MP Router

: 

The output is similar to the following:

HP StorageWorks SAN Director 2/128 and 4/256 SAN Director

: 

switch:admin> 

trackchangesset 1

 

Committing configuration...done.

switch:admin>

2004/08/24-08:45:43, [TRCK-1001], 212,, INFO, ras007, Successful login by user 

admin. 

switch:admin> 

trackchangesshow

 

Track changes status: ON

Track changes generate SNMP-TRAP: NO

switch:admin>

switch:admin> 

switchstatuspolicyshow

 

The current overall switch status policy parameters:

                   Down    Marginal

 ----------------------------------

     PowerSupplies  2         1

      Temperatures  2         1

              Fans  2         1

             Flash  0         1

     MarginalPorts  5         2

       FaultyPorts  2         1

       MissingSFPs  2         1

switch:admin>

Summary of Contents for AA979A - StorageWorks SAN Switch 2/8V


















































































































































































































































































































































































































































































Reviews:

No comments